Mi151 pH/ORP/Temperature Laboratory Bench Meter

This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically improve the reliability of the measurement:

• Automatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures;

• Hold Function freezes reading for easy viewing;

• Easy to read large custom LCD;

• Stability Indicator prompts whenever reading stabilizes;

• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01and 12.45) for calibration;

• Messages on the LCD to make the calibration easy and accurate;

• User-selectable “calibration time out” to remind when a new calibration is necessary.

Mi151 can also measure with ORP electrodes, thanks to its capability to measure mV with a resolution up to 0.1 mV. For accurate measurements, use the electrode holder supplied with the meter.

Glass Electrode & Temperature Probe Choose from our wide selection of pH and ORP electrodes at page 37. Custom dual level LCD Large and easy to read Custom dual level LCD Display with s i m u l t a n e o u s readings and with user-friendly icons.

home page

Mi160 pH/ORP/ISE/Temperature Laboratory Bench Meter

This new pH/ORP/ISE/Temp bench meter is ideal for very accurate and precise measurements for all laboratory needs. It can perform ion-selective measurements directly in ppm, as well as pH, ORP and temperature measurements.  pH calibration can also be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide differences in pH can be found.  Thanks to the memory it can store up to 50 data sets for each range that can be downloaded to a PC via RS232 or USB. These instruments also have GLP features so, at any time, the user can recall the calibration data.

• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for pH calibration

• pH calibration up to 3 points

• ISE calibration up to 2 points; six standard solutions available: 0.01, 0.1, 1, 10, 100, 1000 ppm

• Messages on the LCD to make the calibration easy and accurate

• Relative mV feature

• GLP feature, to view last calibration data for pH or ISE

Easy PC Compatibility RS232 or USB communication interface allows readings to be downloaded to a serial port. Rear Connector Panel layout Communication to the PC is done via opto-isolated USB and RS232 ports.

home page

The "MUST HAVE" Bench Meter for all Laboratories and at the BEST PRICE!

Mi180 pH/ORP/EC/TDS/NaCl/Temperature Laboratory Bench Meter

Mi180 measures 6 different parameters: pH, ORP, EC, TDS (Total Dissolved Solids), percentage of NaCl and temperature in a variety of ranges.  pH calibration can be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide differences in pH can be found.  The auto-ranging feature for EC and TDS measurements automatically sets the resolution suitable to the tested sample.  All measurements can be temperature compensated at 20 or 25°C and the compensation coefficient is selectable by the user.  The automatic temperature compensation can also be disabled for measuring the actual conductivity value.  The stability indicator on the LCD ensures accuracy.  Conductivity readings are performed with the 4-ring probe supplied with the meter.  The GLP feature allows users to store and recall data on system status. PC compatible through an RS232 port or USB. 

 (*) Uncompensed conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.

home page