CD600 TDS Economical Pocket Tester
Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values. Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically.
The CD600 is a TDS tester specifically designed for water analysis. The calibration procedure is very simple and fast. This tester has automatic temperature compensation, 10 ppm resolution and a range of 0 to 1990 ppm. CD600 is supplied complete with protective cap, calibration screwdriver, batteries and instructions.
| SPECIFICATIONS | |
| Range | 0 to 1990 ppm |
| Resolution | 10 ppm |
| Accuracy | ±2% Full Scale |
| EMC Typical Deviation | ±2% Full Scale |
| Environment | 0 to 50°C / 32 to 122°F; max RH 95% |
| Battery Type | 4 x 1.5V, alkaline (included) |
| Battery Life | approx. 350 hours of continuous use |
| Dimensions | 150 x 30 x 24 mm |
| Weight | 85 g |
| ACCESSORIES | |
| M10032B | 1382 ppm (mg/L) calibration solution, 20 mL (25 pcs) |
| MA9305 | 1.5V batteries (100 pcs) |
| MA9071 | Screwdriver for calibration |
| ORDERING INFORMATION | |
CD600 is supplied complete with protective cap, calibration screwdriver, batteries and instructions. |
|