home page

Products > Monitors > SMS310
Instruction Manual
Instruction Manual
Print
Print

SMS310 Smart Conductivity Monitor with set point range from 0.0 to 10.0 mS/cm)

Milwaukee’s low cost durable meters for quick and reliable measurements. The Smart monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint. All these instruments run on a 12V adapter so there’s no need to worry about failed batteries.

Smart monitors are very simple to operate: 1. Hang your monitor above your reservoir 2. Connect the adapter to the meter and plug in the power supply 3. Immerse 2/3 of the electrode in the solution 4. The electrode can now remain there permanently.

The SMS310 is a reliable conductivity monitor with automatic temperature compensation and 1 point manual calibration, powered by a 12 VDC adapter. The SMS310 is ideal for the hydroponic market and allows you to continuously monitor EC value directly in your reservoir. Other features include: user selectable set point, visual LED alarm when values go below the set point.

 SMS310

MA811/2
Conductivity probe with 2 m cable
Calibration, Maintenance & Cleaning Solutions
 Choose from our wide selection of calibration, maintenance and cleaning solutions.
SPECIFICATIONS
Range 0.0 to 10.0 mS/cm
Resolution 0.1 mS/cm
Accuracy ±2% Full Scale
Set Point 1.5 to 3.5 mS/cm
Alarm active when the measure is lower than the set point
Temperature Compensation automatic, from 5 to 50°C
Environment 0 to 50°C / 32 to 122°F; max RH 95%
Probe MA811/2 (included)
Power Supply 12 VDC power adapter (included)
Dimensions 165 x 80 x 40 mm
Weight 220 g (meter only)

 

 
 
 
 
ACCESSORIES
MA811/2 Conductivity probe with 2 m cable
M10031B 1413 µS/cm calibration solution,
20 ml sachet (25 pcs)
M10032B 1382 ppm calibration solution,
20 ml sachet (25 pcs)
M10039B 5.00 mS/cm calibration solution,
20 ml sachet (25 pcs)
M10442B 1500 ppm calibration solution,
20 ml sachet (25 pcs)
 
ORDERING INFORMATION
SMS310 is supplied complete with 12VDC adapter, MA811/2 EC probe, 20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration and instruction.