C61 Microprocessor Conductivity Tester with automatic temperature compensation
This simple 1-point calibration tester is designed for the Horticultural and Agricultural market. It is built in a one-piece splash-proof casing and it is immersible up to the LCD.
The tester has Automatic Temperature Compensation and the temperature sensor housing is made out of 316 inox steel instead of plastic. This ensures 100 times faster readings and higher accuracy.
The C61 is a Conductivity Tester with a low range of 0 to 0 to 1999 µS/cm.
 |
Temperature sensor |
 |
Supplied in a box The tester is supplied in a box complete with calibration solution, protective cap, 4 x 1.5V batteries and instructions. |
| SPECIFICATIONS | |
| Range | 0 to 1999 µS/cm |
| Resolution | 1 µS/cm |
| Accuracy | ±2% Full Scale |
| Temperature Compensation | automatic, 5 to 50°C |
| Environment | 0 to 50°C / 32 to 122°F; max RH 95% |
| Battery Type | 4 x 1.5V (included) |
| Battery Life | approximately 350 hours of use |
| Dimensions | 155 x 45 x 25 mm |
| Weight | 150 g |
| ACCESSORIES | |
| M10030B | 12880 µS/cm calibration solution, 20 ml (25 pcs) |
| M10031B | 1413 µS/cm calibration solution, 20 ml (25 pcs) |
| M10032B | 1382 ppm (mg/L) calibration solution, 20 ml (25 pcs) |
| M10038B | 6.44 ppt (g/L) calibration solution, 20 ml (25 pcs) |
| M10080B | 800 ppm calibration solution 20 ml (25 pcs) |
| ORDERING INFORMATION | |
C61 is supplied complete with protective cap, 20 mL 1413 µS/cm sachet of calibration solution, hard carrying case, calibration screwdriver, batteries and instructions. |
|