C66 Waterproof Conductivity Tester with replaceable electrode (high range)
The C66 is a conductivity IP67 waterproof tester, specifically designed for the hydroponics and Agricultural markets, with automatic temperature compensation and 1 point manual calibration. The tester has a range of 0.00 to 10.00 mS/cm.
The C66 has a replaceable electrode and is supplied in a casing with calibration solution sachets (M10031) and screwdriver for calibration.
The modular design allows easy electrode and battery replacement.
 |
Hard Carrying Case |
 |
Calibration, Maintenance & Cleaning Solutions Choose from our wide selection of calibration, maintenance and cleaning solutions. |
| SPECIFICATIONS | |
| Range | 0.00 to 10.00 mS/cm |
| Resolution | 0.01 mS/cm |
| Accuracy | ±2% Full Scale |
| Typical EMC Deviation | ±2% Full Scale |
| Temperature Compensation | automatic from 5 to 50°C, with β=2%/°C |
| Calibration | manual, at 1 point through trimmer |
| Probe | MA73076 (replaceable) |
| Environment | -5 to 50°C / 32 to 122°F; max RH 100% |
| Battery Type | 3 x 1.5V (included) |
| Battery Life | approx. 250 hours of continuous use |
| Dimensions | 165 x 30 x 30 mm |
| Weight | 80 g |
| ACCESSORIES | |
| MA73076 | Replaceable Conductivity probe, HR |
| M10030B | 12880 µS/cm calibration solution, 20 ml (25 pcs) |
| M10031B | 1413 µS/cm calibration solution, 20 ml (25 pcs) |
| ORDERING INFORMATION | |
C66 is supplied complete with protective cap, 20 mL 1413 µS/cm sachet of calibration solution, hard carrying case, calibration screwdriver, batteries and instructions. |
|