T75 Waterproof TDS Tester with replaceable electrode (low range)
These instruments are designed for all applications. Its’ IP67 Waterproof casing and double junction (for pH) replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.
The T75 is a waterproof TDS tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 ppm (mg/L). The tester has a replaceable electrode and is supplied complete with sachets of calibration solution, leather casing and calibration screwdriver.
 |
Hard Carrying Case |
 |
Calibration, Maintenance & Cleaning Solutions Choose from our wide selection of calibration, maintenance and cleaning solutions. |
| SPECIFICATIONS | |
| Range | 0 to 1999 ppm (mg/l) |
| Resolution | 1 ppm (mg/l) |
| Accuracy | ±2% Full Scale |
| Typical EMC Deviation | ±2% Full Scale |
| Temperature Compensation | automatic from 5 to 50°C, with β=2%/°C |
| TDS Factor | 0.5 |
| Calibration | manual, at 1 point through trimmer |
| Probe | MA73075 (replaceable) |
| Environment | -5 to 50°C / 32 to 122°F; max RH 100% |
| Battery Type | 3 x 1.5V (included) |
| Battery Life | approx. 250 hours of continuous use |
| Dimensions | 165 x 30 x 30 mm |
| Weight | 80 g |
| ACCESSORIES | |
| MA73075 | Replaceable Conductivity probe, LR |
| M10032B | 1382 ppm (mg/L) calibration solution, 20 mL (25 pcs) |
| M10038B | 6.44 ppt (g/L) calibration solution, 20 mL (25 pcs) |
| M10080B | 800 ppm calibration solution 20 mL (25 pcs) |
| ORDERING INFORMATION | |
T75 is supplied complete with protective cap, 20 mL 1382 ppm sachet of calibration solution, hard carrying case, calibration screwdriver, batteries and instructions. |
|