1300 662 720

Customer Support

1300 662 720

Customer Support

MW801

Standard Portable pH / Conductivity / TDS Combination Meter

2 in stock (can be backordered)

    • 0 $

$ 591.00 Ex. GST

Share

Share on facebook
Share on twitter
Share on whatsapp
Share on email

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The Milwaukee MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.

 

ORDERING INFORMATION
MW801 is supplied complete with SE600 combination pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL 1382 ppm sachet of calibration solution, 9V battery and instructions.

Specifications

pH Range 0.0 to 14.0 pH
EC Range 0 to 1990 µS/cm
TDS Range 0 to 1990 ppm
pH Resolution 0.1 pH
EC Resolution 10 µS/cm
TDS Resolution 10 ppm
pH Accuracy ±0.2 pH
EC/TDS Accuracy ±2% Full Scale
Calibration Solutions M10007 (pH 7.01)
M10032 (1382 ppm)
M10031 (1413 mS/cm)
Conversion Factor 0.5
Calibration manual, at 1 point
Temperature Compensation automatic, from 0 to 50°C
Probe SE600 combination pH/EC/TDS probe
Environment 0 to 50°C / 32 to 122°F; max RH 95%
Battery Type / Battery Life 1 x 9V alkaline / 150 hours of use
Auto-off after 8 minutes of non-use
Dimensions 185 x 82 x 45 mm
Weight 165 g (with battery)

Literature

Brochure

Instruction Manual

Add-Ons