1300 662 720

Customer Support

1300 662 720

Customer Support


TDS Monitor

Currently Out of Stock, Backorder only! This item may take 3-4 weeks to deliver. Call us on 1300 662 720

    • 0 $

$ 191.39 Ex. GST


Share on facebook
Share on twitter
Share on whatsapp
Share on email

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there’s no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

TDS – PPM Monitor

  • User selectable Hi/Low Set Point
  • Manual 1 point calibration
  • Visual LED alarm
  • Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
  • MA812/2 PPM Probe with 2m cable

MC410 is supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution.


Range 0 – 1990 ppm
Resolution 10 ppm
Accuracy ±2% Full Scale
Setpoint range 700 – 1800 ppm
Conversion Factor 0.7
Alarm Active when reading is higher or lower than set point
Temerature Compensation automatic; from 5 to 50 oC
Probe MA812/2 (included)
Environment 0 to 50 oC / 32 to 122 oF; max RH 95%
Power Supply 12 VDC adapter (included)
Dimensions 148,5 x 82,5 x 32 mm
Weight 180 g (meter only)


Instruction Manual