IP65 Waterproof pH tester with Large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from -2.00 to 16.00 pH (with a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F.
pH56 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Complete with a temperature probe for faster and more precise temperature measurement it compensates automatically for temperature.
Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.
CARE AND USE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Starter Solution Kit for pH Meters at checkout time! This will be needed to help clean and condition the pH electrode before use!
Here are our top four tips:
1. Always store with the cap full of buffer or Storage Solution not water.
2. Clean your Tester regularly by soaking in Cleaning Solution.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.
|pH56 is supplied complete with protective cap, 20 mL pH 4.01 and pH 7.01 sachets of calibration solution, carton box, batteries and instructions.|